Product ID:STANDARD INK-SERIES 39 MARKER,R-51
MSDS Date:01/01/1987
FSC:6680
NIIN:01-023-8008
MSDS Number: BGFJC

GRAPHIC CONTROLS CORPORATION

Emergency Phone: (609) 424-2200

Cage: 17405

GRAPHIC CONTROLS CORP INDUSTRIAL PRODUCTS DIVISION

1309 BUFFALO, NY 14240 US

Telephone: 716-853-7500

Cage: 17405

FORMALDEHYDE (SARA III)

CAS: 50-00-0

RTECS: LP8925000

OSHA PEL SEE 1910.1048

ACGIH TLV: C 0.3 PPM; A2; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

WATER; CAS #7732-18-5

CAS: 7732-18-5

RTECS: ZC0110000

DYE

Effects of Overexposure:EYES:MAY CAUSE CONJUNTIVIT.IRRIT;SKIN:SLIGHT
IRRIT;INGEST:MAY BURN MOUTH,ABDOM PAIN;INHAL:IRRIT THRT

First Aid:EYES:FLUSH IMMED W/PLENTY OF WATER FOR AT LEAST 15
MIN;SKIN:WASH W/LUKE WARM WATER & SOAP;INHAL:IF DIFF IN
BREATHING,RMV TO FRESH AIR.GIVE CPR/OXY IF NEEDED;INGEST:USE
GASTRIC LAVAGE OF 1% AMM.CARBONA TE FOLLOWD BY SALINE CATHARSIS;GET
MED ATTN FOR:

Flash Point:NONE
Extinguishing Media:EXTINGUISH WITH AGENT SUITABLE FOR SURROUNDING FIRE
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG,APP H*20 SPRAY TO COOL
CONTR.
Unusual Fire/Explosion Hazard:NONE NOTED BY MANUFACTURER.

Spill Release Procedures:USE PROTECTV GLOVES & CLOTHINGS DURING
CLEAN-UP.WIPE UP SM SPILL W/TOWELS/CLOTHES,RMV STAINS W/SOAPY
WATER. COVER UP LARGE SPILL WITH ABSORBENT.KEEP ABSORBED MATL IN
COVRD CONTAINERS PENDING DISPOSAL INSTRUCTIONS.

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED
AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT. KEEP
CONTAINERS TIGHTLY CLOSED
Other Precautions:AVOID FREEZING OR TEMPERATURES OVER 140F.

Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:NORMAL ROOM VENTILATION.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:NORMAL WORK CLOTHING COVERING ARMS & LEGS.
Supplemental Safety and Health
MSDS FROM GRAPHIC CONTROLS NOT DATED.

HCC:N1
Boiling Pt:B.P. Text:212F/100C
Vapor Pres:20
Spec Gravity:1.1
Solubility in Water:COMPLETE
Appearance and Odor:RED LIQUID.SLIGHT ODOR OF FORMALDEHYDE

Stability Indicator/Materials to Avoid:YES
NOT KNOWN
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:WHEN INVOLVED IN FIRES.MAY EMIT

Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.